2023-08-01 With the rapid development of China's oil industry, the demand for high-grade steel is growing, and high-grade steel must be quenched, and therefore the study of the overall quenching of steel is very important. China Heavy Machinery Research Institute has developed a "dip quenching + internal spray
Read More 
2023-07-31 ① Tensile test: measure stress and deformation, determine the strength (YS, TS) and plasticity index (A, Z) of the materialLongitudinal and transverse specimen pipe section, arc, circular specimen (￠10,￠12.5)Small-diameter thin-walled steel pipes, large-diameter thick-walled steel pipes, and fixed g
Read More 
2023-07-27 Processing methods of pipe fittings there are many. Many also belong to the scope of machining and the like, the most widely used method of stamping, forging method, roller processing method, rolling method, bulging France, stretching, bending method, and a combination of processing method. Tube pro
Read More 
2023-07-26 Frequency welded pipe production process, affecting the quality of the elements have more than one pipe, the main raw materials, welding technology and roll count which is beginning to adjust.Key to look at raw geometric dimensions. Strip geometry affect the quality of the steel strip width when les
Read More 
2023-07-25 High-pressure alloy pipe deformation strengthening is using the method of deformation of steel reinforcement. Also known as the strain hardening or work hardening. The strength of the material at the macro (or a whole) the ability to resist deformation (or flow stress). Hardness is the ability of th
Read More 
2023-07-24 Transverse cracks will affect the finished product rate just after rolling. Increase billet cleanup time, both great harm. The slab temperature is brittle zone of 700-900 ℃. The reason the lower surface cracks is 1050-1100 ℃, transverse cracks on the surface of the reason is the billet surface by a
Read More 
2023-07-21 According to the technological requirements of different manufacturers, precision tubes length measurement systems with a variety of length measurement methods. There are the following:1, The grating length measurementThe basic principle is: the outer ends of precision tubes are provided two fixed l
Read More 
